³Ô¹Ï´ïÈË

Polishing is the third (and most noticeable) step of the 4 step professional maintenance program. This pro grade formula leaves an attractive, glossy and durable polish that resists heel marks and prevents slips in high traffic areas.

• Durable Finishing Polish
• Scuff & Slip Resistant
• Use On Vinyl (Vct), Sealed Concrete, Rubber & No-Wax Tile Floors
• For Low Maintenance Plans, Infrequent Buffing/Burnishing
• Also Try Zep® Floor Stripper, Floor Sealer And Neutral Ph Floor Cleaner To Enhance The Life Of Floor Finishes

Instructions

Pour polish into a clean Pail. Using a dry rayon string mop, apply 4 coats of finish. To achieve a thin, even coat, move the mop in a continuous figure-eight motion. Allow floor to dry completely between coats to prevent hazing and to ensure adhesion; approximately 3 minutes under normal conditions. Do not use fans to reduce drying time. Maintain floor by frequent dust mopping and daily damp mopping with Zep Commercial Neutral Floor Cleaner to provide a long lasting, clear gloss finish. To periodically rejuvenate the gloss, spray buff floor while using a low-speed buffing machine with a red pad, or ultra high-speed burnisher with a natural/beige pad. This product is able to be stripped and reapplied as needed.

Pro-Tip: Step #3 in the Floor Care 4 Step Process. For best results, use a dry rayon string mop to apply four coats of finish in figure eight motions on the floor.

California Prop. 65

WARNING: WARNING: This product can expose you to chemicals including 1-bromopropane, which is/are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to .